Tag Archives: belt tensioner pulley

China Best Sales Best Quality Auto Parts Car Engine Parts Timing Belt Tensioner with Tensioner Pulley OEM 16108921 46400045 71734799 for Lancia Dedra Lybra wholesaler

Product Description

Product Description

Best Quality Auto Parts Car Engine Parts Timing Belt Tensioner with Tensioner Pulley OEM 1615711 464 for Lancia Dedra Lybra

Water Pump for FIAT
Water Pump for LXIHU (WEST LAKE) DIS.A

All kinds of car water pumps can be produced for you. Welcome to your inquiry.

 

MIC NO.  REF&OEM NO  APPLICATION  YEAR  PHOTO
TB34FI9601 357735
1615711
46400045
46400054
46416489
46514671
46554826
46742985
46792898
55188191
55211287
 71734799
71736715
71748866		 FIAT  BRAVA (182_) 1.6 16V (182.BB)
FIAT  BRAVO I (182_) 1.6
FIAT  DOBLO Cargo (223_) 1.6 16V (223ZXD1A)
FIAT  DOBLO MPV (119_, 223_) 1.6 16V (223AXD1A)
FIAT  MAREA (185_) 1.6
FIAT  MAREA (185_) 1.6
FIAT  MAREA Weekend (185_) 1.6
FIAT  MULTIPLA (186_) 1.6 (186AXC1A, 186BMC1A, 186BXC1A)
FIAT  PALIO (178_) 1.6 16V
FIAT  PALIO Weekend (178_, 173_, 373_, 374_) 1.6 16V
FIAT  STILO (192_) 1.6 16V (192_XB1A)
FIAT  STILO Multi Wagon (192_) 1.6 16V
LXIHU (WEST LAKE) DIS.A  DEDRA (835_) 1.6 16V (835EI)
LXIHU (WEST LAKE) DIS.A  DEDRA SW (835_) 1.6 16V (835EI)
LXIHU (WEST LAKE) DIS.A  DELTA II (836_) 1.6 i.e. (836AP)
LXIHU (WEST LAKE) DIS.A  LYBRA (839_) 1.6
LXIHU (WEST LAKE) DIS.A  LYBRA SW (839_) 1.6 (839.BXF1A)		 1996-2001
2000-2001
2001-
2001-
2000-2002
1999-2000
2000-2002
2000-2571
1996-2002
2001-2012
2001-2006
2003-2008
1996-1999
1996-1999
1996-1999
2000-2005
2000-2005

 

Company Profile

Our Factory

Exhibition Shows

FAQ

Q1: Are you a trading company or manufacturer?
A1: We are industrial and export combination.

Q2: If there’s any quality problem, what would you do to guarantee our rights?
Q2: We seldom get complains from our customers so far. If it really happens, we’ll be responsible for that.

Q3: How long is your delivery time?
Q3: Around 30-45 days if no stock; Around 7 days when stock available.

Q4: What’s your sample policy? 
A4: Samples under $50.0 will be no charge, however the freight charge should be borne on buyer’s account.
Normal delivery time will be 4 days when stock available.

Replacing a Failing Drive Belt Tensioner

A failing drive belt tensioner can be extremely costly. Here’s what to look for and what to do if you suspect yours is bad. In addition, you’ll learn how to identify Idler pulleys and repair it yourself. If the tensioner is failing, you should replace the belt, as well as the Idler pulleys and shaft bearings. But what if the tensioner isn’t faulty?
belt

Symptoms of a bad or failing drive belt tensioner

If your car’s drive belt is not moving smoothly, the pulley may be at fault. Ideally, the tensioner pulley should move away from the engine when the car starts. However, if it stays put or starts to move toward the engine, it’s time to replace the tensioner. The belt may also start to exhibit different wear patterns, such as the uneven wear of the sprockets, bearings, and springs.
If the serpentine belt begins to look loose and the engine loses its luster, the problem is most likely the bad drive belt tensioner. This issue will result in engine vibration. A faulty drive belt tensioner may also lead to a faulty spark plug, which prevents fuel from burning in the combustion chamber. This issue will likely require an engine diagnostic tool, such as an OBD2 scanner, to determine the cause of the check engine light.
Another sign that your drive belt tensioner is failing is a chirping noise. This noise can occur intermittently or constantly, and it may signal a problem with the pulley. In some cases, a faulty pulley may even cause your engine to misfire. Additionally, you may notice that the engine won’t start, even if you engage the starter motor.
In addition to the noise that may come from a failing tensioner, the bad belt tensioner may cause your serpentine to fail. In addition to the noise, this can also lead to overheating of the engine, which can result in costly damages. In addition to causing engine damage, a bad belt tensioner won’t reserve the minimum tension it needs to do its job and may even exceed it, causing the belt to wear out much faster.
If you notice any of these symptoms, it may be time to replace the drive belt tensioner. You can find a replacement OEM part online at a discounted price, as they’re available in wholesale quantities. A Mazda engine typically has no other parts blocking the serpentine belt path, so you can easily find the part you need. After replacing the drive belt tensioner, you’ll need to replace the serpentine belt as well.

Cost to replace a drive belt tensioner

Depending on the location and type of vehicle, replacing a drive belt tensioner can cost between $235 and $267. Some repairs may require other parts, such as a serpentine belt or tensioner housing. RepairPal’s Fair Price Estimator can help you get an accurate estimate for your particular vehicle. You can also contact HomeX, a virtual repair shop that can fix simple issues like loose drive belt tension.
It’s a relatively simple DIY job for most cars. An experienced mechanic will be able to replace the belt in a half hour or less, depending on the type of car and how many parts are affected. Depending on the complexity of the repair, the labor to replace the drive belt tensioner could cost anywhere from $50 to $170. The labor to replace the drive belt tensioner is typically included in the quoted price, but some auto shops may charge more to replace other car parts as well.
Replacing the drive belt tensioner is a relatively easy task. While the process might take an hour or more, it will be worthwhile in the long run. Regular inspections can prevent costly repairs by identifying problems before they cause major damage. A car’s belt is essential to the operation of the engine and can’t be operated without it. Changing it can save you money, as it will save you from spending extra on unnecessary parts.
Thankfully, there are plenty of tools available to help you replace your drive belt. While it may not be the easiest repair, it will still cost less than a mechanic’s service call. It is better to replace the belt early than to wait for the vehicle to break down, as this will prevent more expensive parts from breaking. You may also consider investing in a premium belt, which will give you twice as much mileage as a cheaper one.
While a drive belt tensioner is generally considered a wear-and-tear item, it is a part that should last the entire life of the vehicle. You can expect to replace the drive belt tensioner no earlier than 125,000 miles, but it is better to do it early if your car isn’t that old. And it doesn’t hurt to check the owner’s manual for directions on how to replace the drive belt tensioner.
belt

Idler pulleys

Idler pulleys may seem like a minor part of your car, but their important job is to keep various components in good working order. Fortunately, they are inexpensive and don’t need much maintenance. If 1 pulley fails, it is best to replace all of them. However, it is not always easy to check idler pulleys yourself. It’s recommended that you visit a professional auto repair shop that is ASE-certified to inspect and replace the idler pulley.
Depending on the size and type of idler pulleys you need, you’ll have to purchase 2 or 3 pieces. You’ll need to purchase a pair of pliers for this part, as well as a tensioner pulley wrench. The cost of a replacement idler pulley will vary by make and model, but you can expect to pay between $40 and $200. These prices don’t include taxes or fees. Because they are so essential to drive belts, it’s worth investing in 1 or two.
Idler pulleys are a vital part of a car’s engine. They’re found underneath the hood and are usually 2 to 4 inches in diameter. They run over a roller that’s used to tension the belt. The belt is wrapped around a series of engine parts, and the idler pulleys are a complement to each other. You may not need an idler pulley on your car, but your mechanic will install it for you if you don’t.
The idler pulleys for a belt tensioner are crucial parts of your car’s engine. If they are worn down, the belt is likely to move loosely over them. Corrosion may also make the idler pulley move less freely. If the idler pulley is slipping, the belt may jump over the pulley, and the squealing noises will indicate a serious problem.
The idler pulley is a pivotal part of the engine’s power train. It redirects the path of the serpentine and timing belts, so that they can make optimal contact. The larger the contact patch, the more power the belt will transfer. The idler pulley can also improve the vehicle’s performance. It is a vital part of the engine, so make sure you check it frequently and install it correctly.
belt

Repairing a drive belt tensioner

Replacing a drive belt tensioner is relatively simple. While your belt may need to be replaced, other parts of your engine may also need to be fixed. Typically, the tensioner will be replaced along with the pulley, as both parts are prone to malfunction. Replacing the drive belt tensioner is a fairly straightforward job, and it should only take about an hour or two. By following these simple steps, you can save yourself a lot of money and time.
You can detect the problem by observing the belt glazing. Typically, it occurs when the tensioner does not have enough spring tension. Another sign of a failed component bearing is excessive arm oscillation. Excessive chattering and oscillation indicate that the damper has worn out. If you notice excessive oscillation, you should replace the tensioner pulley. Otherwise, you might be dealing with a defective bearing.
A damaged or out-of-adjusted drive belt will make a squealing noise. This is due to the belt slipping on the pulleys. It is most noticeable when the car is first started in the morning. A damaged drive belt will also be hard to manipulate. The new belt should be the same length and width as the old one. You can check the tensioner by pulling the belt and compressing it.
A worn-out drive belt tensioner will result in unusual noise, excessive wear, and a loose belt. This is especially affecting if the car is equipped with a serpentine belt. The drive belt tensioner has a roller bearing that can wear out, which will cause a squealing noise or even cause the belt to roll off entirely. Because of its important role in engine operation, it is vital to check the condition of the drive belt tensioner on a regular basis.
While replacing a drive belt tensioner may seem like a simple DIY project, you should consult a mechanic before undertaking the work. The parts and labor costs of a drive belt tensioner repair can range from $140 to $400, and you should allow an hour for this repair. If you are not comfortable performing the repair yourself, you can always hire a mechanic to do it for you. In most cases, a drive belt tensioner replacement will cost approximately $70 to $80 and take about an hour.

China Best Sales Best Quality Auto Parts Car Engine Parts Timing Belt Tensioner with Tensioner Pulley OEM 16108921 46400045 71734799 for Lancia Dedra Lybra wholesaler China Best Sales Best Quality Auto Parts Car Engine Parts Timing Belt Tensioner with Tensioner Pulley OEM 16108921 46400045 71734799 for Lancia Dedra Lybra wholesaler

China Custom Timing Pulley Toothed Synchronous Drives Pilot Bore Metric Pitch Sprocket Taper Bore 6 Inch V Belt Pulleys Wheels Sheave Suppliers Tensioner Automobile with Good quality

Product Description

            Timing Pulley Toothed Synchronous Drives Pilot Bore Metric Pitch Sprocket Taper Bore 6 Inch V Belt Pulleys Wheels Sheave Suppliers Tensioner Automobile         

Types of V-Belt Drives

When evaluating drive technologies, you might want to consider a V-Belt. Not only can it improve the performance of an older drive, but it can save you time and money in the long run. Industry standard V-belts are prone to failing because of excessive wear, heat cracks, and stretching. Inefficient and downtime resulting from frequent retensioning and replacement can cost your company both time and money.
belt

Cross-

A cross-belt for a V-Belt is a belt that is used in a conveyor system. This belt consists of 2 parts: an elastomer core and a fabric cover. The elastomer core is typically made of high-shock-resistant polyurethane. Different manufacturers have different synthetic rubber stocks, which may be used to prevent premature failure and extend the operating temperature range of the belt. Ideally, a well-engineered V-belt is stiff in the width and flexible along the length of the belt. The fabric covers are generally made of 2 different types of rubber, including compression and cushion rubber.
The diameter of the driver and driven pulleys are important considerations for choosing the right cross-belt for a V-belt. This will determine the belt length. The length should be proportional to the diameter of the drive shaft. Smaller diameters are better for smaller belts, which can increase elongation, which decreases the life of the belt. Larger diameters, on the other hand, can increase slippage, fluctuating force, and power loss.
Choosing the right V-belt for your vehicle is important, especially if you’re replacing a worn-out one. In some cases, the old V-belt may become too loose or a loop with a rubber-coated edge. You should measure the length of the belt before you buy it. Using a flexible english measuring tape, you can determine which size is best for your vehicle.
A cross-belt can increase power transmission by minimizing slipping. It also provides shock-absorption and increases the load capacity of the V-belt. It is the best option for heavy-duty machines where torque and power are critical. In some applications, this belt may be more effective than an open belt. If you use it for short distances, a cross-belt can be a better choice.
When choosing a V-belt, make sure to check the power ratio. The power of a belt depends on the initial tension applied to it. Also, the friction between the 2 mating surfaces is a factor. A V-belt with a high power density is not suitable for close-center applications. You can choose a narrow V-belt if you need a narrow belt for your machine.
belt

U-shaped

The V-belt is a versatile belt used in countless industrial applications. Advancements in engineering have led to many different types of V-belts. Whether it’s a U-shaped belt or a double-sided V-belt, proper installation and maintenance are crucial for trouble-free operation. Below are some common V-belt specifications. Read on to learn more! The U-shaped V-belt is 1 of the most common.
A V-belt is a flexible, pliable machine element used to transmit power between 2 or more rotating shafts. Its cross-section is trapezoidal, so that as the tension increases on 1 side, the belt wedges into the groove on the opposite side. The increased friction between the 2 components results in a high torque transmission and minimal power loss from slippage. U-shaped V-belts are ideal for a variety of applications, from lawn mowers to cars.
The U-shaped V-belt is made of 2 parts: an elastomer core and a textile cover. The core is made from a flexible material with high flexural strength and shock resistance. The cover is made of textile material that is treated to create a chemical bond with the belt’s core material. This makes it pliable and strong while preventing the cover from becoming worn out or damaged.
Unlike flat belts, U-shaped V-belts are designed to fit into a U-shaped sheave, which increases their lateral rigidity. They also maintain their stability under shock and vibration loads. Their simplicity makes installation and tensioning much easier. The constructional components of a standard V-belt are illustrated in Figure 9. Each component has a vital role in the belt’s performance. Similarly, different materials can influence the belt’s performance.
As with any belt, proper tension is crucial. Having a loose belt causes slippage and rapid wear, which robs you of energy and productivity. Likewise, too much tension can cause premature belt wear. Proper tension is defined as the lowest level at which the belt does not slip or squeal under peak load. This tension range can still operate a drive, so it’s important to find the correct tension for your particular application.

Cogged

There are many advantages of a Cogged V-Belt. Its extra-thick construction allows for bends around smaller pulleys. It also runs cooler and lasts longer than a traditional V-belt. In addition, it has a higher coefficient of friction than a wrapped V-belt. Cogged V-Belts can also resist heat, making them an excellent choice for high-temperature applications.
A cogged V-Belt is also less likely to suffer from heat buildup, which can shorten the life of a standard belt and increase downtime and replacement costs. A Cogged V-Belt is more expensive than a wrap-molded belt, but it will pay for itself in as little as 1 month. Most synchronous belt conversions pay for themselves in less than 2 years. A longer payback time is typical with a larger system.
Cogged V-Belts are used in many applications, including in-line conveyors, gantry cranes, and wind turbines. The belt itself is composed of various types of rubber and reinforcements. They undergo tensile and compressive stresses as each segment of the belt passes through the pulley. Therefore, a different type of material is needed for the bottom side of the belt. The ideal material for this area should have a high coefficient of friction and increased wear resistance.
The Cogged V-Belt has a trapezium-shaped cross-section. The fabric cover resists heat and abrasion and helps protect the internal components of the v-belt. The different types of materials used in the fabric cover are patented. In some cases, the fabric cover is made of Kevlar or aramid fiber. This allows for smaller pulley diameters and more flexibility.
A Cogged V-Belt is made of 2 pieces of material. One is thick and includes a pitch line while the other has a slack side. The top is thicker and wider, while the bottom side has a lower pitch line. The slack side has a less pitch and more tension. Using a Cogged V-Belt will increase your productivity and help you save money.
belt

Wedge

The Wedge V-Belt is 1 of the most popular types of drive belts available. The patented, narrow-profile design allows for lighter, thinner belts with greater transmission capabilities. The HY-T V-Belt is constructed with Vytacord tension members for strength and dimensional stability, and includes a cushion made of engineered rubber compound. This belt is ideal for high-speed, high-resistance applications, such as compressors, stone mills, and centrifugal pumps.
HY-T CZPT(r) belts have a continuous V-section, and a wide angle of flexibility. They provide torsional rigidity in long-center drives and are resistant to oil. The CZPT(r) belt is available in lengths up to 140 inches. Its free ribs wedge into the sheave groove to reduce belt whipping. This belt is also designed to fit into new designs and applications, so it’s compatible with virtually any type of drive.
The Wedge V-Belt is a popular choice in industrial applications. Its narrow profile reduces drive weight and space, allowing for higher horsepower. In addition, it can carry a higher load than a standard V belt. Its low cost and high efficiency make it a popular choice for many industrial applications. In addition to industrial settings, it is a popular choice in automotive and construction applications. While it may seem like a complicated belt design, the Wedge V-Belt is ideal for industrial use.
Wedge V-Belts have the same contact angle as the traditional v-belt, but have a narrow upper width. Their narrower upper width decreases their weight, which equalizes the tension on the tensile cord. The wedge-shaped design improves grip and increases wedge effect. Its durability is excellent, and it also features a cog shape for greater gripping power.
Wedge V-Belts are an efficient way to transmit power between 2 drives. They can move significant loads and can achieve very high speeds. The wedged shape of the belt allows it to wedge into the groove when the load increases. Moreover, it minimizes power loss due to slippage. If you want to get the most out of a Wedge V-Belt, make sure it is made of a material that resists heat and moisture.

China Custom Timing Pulley Toothed Synchronous Drives Pilot Bore Metric Pitch Sprocket Taper Bore 6 Inch V Belt Pulleys Wheels Sheave Suppliers Tensioner Automobile with Good qualityChina Custom Timing Pulley Toothed Synchronous Drives Pilot Bore Metric Pitch Sprocket Taper Bore 6 Inch V Belt Pulleys Wheels Sheave Suppliers Tensioner Automobile with Good quality

China Custom Auto Bearing Belt Tensioner Pulley Part Number 1079173 1079173 Vkm14108 for CZPT Fiesta and Mondeo near me factory

Product Description

Quick view:

Description Auto Bearing Belt Tensioner Pulley Part Number 157173 157173 VKM14108 For CZPT FIESTA And MONDEO
Material Chrome steel Gcr15, 65Mn, or 55, Aluminum
Application car makes For FORD
Size Outer: 74 mm
Width: 24 mm
Position Engine spare parts
Weight 0.3 kg
Brand SI, PPB, or customized
Packing Neutral, SI, PPB brand packing or customized
OEM/ODM service Yes
Manufacture place ZHangZhoug, China
MOQ 100 PCS
OEM replacement Yes
Inspection 100%
Warranty 1 year or 40,000-50,000 KMS
Certificate ISO9001:2015 TS16949
Payment T/T, PayPal, Alibaba

Fit for:
For CZPT C-MAX (DM2) 1.8 TDCi 2007-2571
For CZPT FIESTA 2000-2003
For CZPT FOCUS 1999-2012
For CZPT GALAXY (WA6) 1.8 TDCi 2006-2015
For CZPT MONDEO IV 2007-2015
For CZPT S-MAX (WA6) 1.8 TDCi 2006-2014
For CZPT TOURNEO CONNECT 1.8 TDCi 2002-2013
For CZPT TRANSIT CONNECT (P65_, P70_, P80_) 1.8 2002-2013

OE Numbers:
157173
1113174
1215978
1479084
2T1Q06K254AA
2T1Q6K254AA
2T1Q6K254AB
X1C1Q6254AA
XS4Q6B217AD
XSQ6B217AD
YS4Q6K254AB
1E1112700

Reference:
For DAYCO: ATB1001
For FEBI BILSTEIN: 15176
For FEBI BILSTEIN: 21972
For I-NA: 
For S-KF: VKM14108
For SNR: GT352.21
For TIMKEN: TKR9296

Packing and Delivery:

Work shop:

Exhibitions:

FAQ:
Q1.What is your shipping logistic?
Re: DHL, TNT, FedEx express, by air/sea/train.

Q2:What’s the MOQ?
Re: For the belt tensioner, The MOQ is always 100 sets. If ordering together with other models, small quantities can be organized. But need more time due to the production schedule.

Q3. What are your goods of packing?
Re: Generally, our goods will be packed in Neutral white or brown boxes for the hub bearing unit. Our brand packing SI & CZPT are offered. If you have any other packing requests, we shall also handle them.

Q4. What is your sample policy?
Re: We can supply the sample if we have ready parts in stock.

Q5. Do you have any certificates?
Re: Yes, we have the certificate of ISO9001:2015.

Q6:Any warranty of your products.
Re: Sure, We are offering a guarantee for 12 months or 40,000-50,000 km for the aftermarket.
 

Q7: How can I make an inquiry?

Re: You can contact us by email, telephone, WhatsApp, , etc.

 

Q8: How long can reply inquiry?

Re: Within 24 hours.

 

Q9: What’s the delivery time?

Re: Ready stock 10-15 days, production for 30 to 45 days.

 

Q10: How do you maintain our good business relationship?

Re: 1. Keep stable, reliable quality, competitive price to ensure our customer’s benefit;

2. Optimal lead time.

3. Keep customers updated about the new goods.

4. Make customers satisfaction as our main goal.

 

Q11: Can we visit the company & factory?

Re: Yes, welcome for your visit & business discussion.

 

Why Timing Belts Are So Important

What is a timing belt? A timing belt is a toothed synchronous belt that transfers rotary motion from the central motor to the drive pulley. Newer cars often have a synchronous timing belt to increase efficiency. Compared to traditional belts, these are quieter and more efficient. However, they do have their drawbacks. In this article, you’ll learn why timing belts are so important. And if you’re wondering how to replace them, keep reading to find out how you can do this quickly and affordably.
belt

Timing belts are toothed, synchronous belts

Toothed, synchronous, and cogged belts are the 3 most common types of mechanical drive belts. Both toothed and synchronous belts are designed to run over pulleys with corresponding teeth. This positive engagement prevents slippage and speed loss. Timing belts can be toothed or toothless, and the toothed profile meshes with the grooves of the sprocket. They improve energy efficiency and reduce downtime. They are also smaller, quieter, and require no lubrication. These properties allow synchronous belts to operate at higher speeds than chains and gears.
These toothed belts are commonly used in motorcycles and automobiles. They are highly durable and can provide more power than friction-drive belts. Toothed belts are often designed for high-power transmissions and the primary drive of some motorcycles. While timing belts and synchronous belts may seem similar, they are quite different. Synchronous belts, or “toothed belts,” have 2 distinct failure modes. The former is gradual and preventive, whereas the latter is catastrophic.
Despite their similarities, timing belts are often not compatible with all machines. Excessive installation tension will result in belt tooth shear and stress breakage. The teeth of timing belts show signs of excessive tension, as illustrated in Figure 6. Broken teeth are caused by root cracks, which propagate along the tensile member. The individual teeth of the belt will separate from the body of the timing belt.
Synchronous belts have various advantages. Synchronous belts are generally more durable, as they have low installation tension and less stress on the drive system. However, when choosing a timing belt, it is important to consider the conditions that apply to your application. Ideally, you will choose a toothed belt with the lowest possible installation tension. Then, you’ll be on your way to a more efficient drive.

They transfer rotary motion from the central motor to the drive pulley

Timing belts are a common type of transmission, which transfers rotary motion from the central motor to the driving pulley through a series of pulleys. Their basic design is the same as an open belt drive, but they have an idler pulley in the middle to increase the tension and power transfer. Another type of drive is a stepped pulley, which allows different speeds and torques to be obtained.
The center distance between the pulley and the drive pulley determines their distance from each other. The distance between the pulley and the drive pulley determines how much power is transmitted through each pulley. When the pulleys are cross-connected, they cannot transmit as much power as they could if they were parallel, which limits the transmission of torque and prevents parts from breaking.
The main advantages of a timing belt are its comparatively low weight and low maintenance requirements. It has a tensile strength of about 90 percent and is also resistant to harsh conditions. The best timing belt pulleys are made of steel because they are resistant to wear and corrosion and can handle long-term chemical exposure. Plastic timing belt pulleys are also available. These are the lightest and cheapest options for the operator.
Another type of timing belt is a spring belt. Like elastic belts, spring belts are composed of a helical steel spring. They are typically used in model and toy engines for transmission from the crankshaft to other parts of the vehicle. Compared to elastic belts, spring belts last longer and do not have to be adjusted, although the spring belts are more likely to slip under heavy loads.
belt

They are quieter

When choosing a replacement timing belt for your car, consider whether you prefer a rubber belt or a metal one. Rubber timing belts are more prone to wear out over time, while metal timing chains are durable and last longer than their rubber counterparts. Timing belts and chains both need maintenance to keep them operating smoothly and quiet. Listed below are some of the most common benefits of timing belts. Read on for more details.
While both timing belts and chains perform the same function, timing belts are quieter and more affordable. Although timing belts are cheaper to produce, they last less. In addition, timing chains are stronger and less likely to fail. If you’re considering changing your timing belt, you can find a good video about the pros and cons of each. Both belts and chains work to optimize fuel economy, reduce emissions, and improve engine efficiency.
Timing belts are much quieter than rubber belts. However, they are not as effective at regulating engine timing. If you’re concerned about noise when changing timing belts, make sure they’re properly fitted. If your timing belts are too loose, they can cause engine damage. A loose timing belt can force other parts out of sync, and can even cause a serious engine malfunction. Timing belts are quieter than rubber belts, but they’re no match for the sound-proofing properties of rubber.
While the noise of a timing belt can be bothersome, it’s a simple process that will help you drive your car more quietly. Their function is simple and straightforward: the timing belt keeps the engine running at the right speed, and they’re also cheaper than other mechanisms. They’re also easier to maintain and use at high speeds without any problems. Timing belts are available in many different tooth profiles, pitch lengths, widths, and materials. Some manufacturers even offer customized belts for specific purposes.

They are more efficient

Timing belts are more efficient than chains because they have a smaller cross-section and smaller bend radius. These characteristics also enable them to have a smaller overall cost. However, because they require more energy to operate, V-belts are typically chosen because of their relatively low face-value cost. This is because they are less expensive overall, but can cost more over time when you factor in their operational costs. Even so, the initial product cost can be paid off in the first month or 2 with energy savings.
Using a timing belt can greatly improve energy efficiency in many applications. Not only does it increase the torque and power transmitted, but it also minimizes friction and elongation losses. This can lead to a 15 percent energy savings, which is equivalent to EUR 2,390 per year in energy costs! The benefits of timing belts are also numerous. By eliminating the need for tooth-drive sprockets, timing belts can improve the efficiency of a drive system.
In many automobiles from the 1980s to the early 2000s, timing belts were a popular choice. This is because they were less expensive and durable, yet still capable of maintaining the correct timing of an engine. However, timing chains are more reliable these days, and many drivers opt for them over timing belts. They are quieter and last longer, which makes them more desirable for drivers. In general, timing chains are cheaper but less efficient than belts.
Timing chains were a more expensive option, but the oil crisis pushed manufacturers to make cars with fuel efficiency their top priority. With timing belts, manufacturers realised that they were cheaper, easier to install, and more reliable. However, timing chains had a few drawbacks. One of the main disadvantages was that they were harder to replace, and required more engine oil. But with the price of fuel and gas, timing chains were preferred by many drivers.
belt

They require lubrication

Timing belts are an integral part of engine performance. They keep the engine’s valves open and closed at the correct times and are designed to fit around the gears inside the engine. Timing belts do not require lubrication but are still important to keep the engine working smoothly. Self-servicing car parts can be used to maintain the health of your timing belt. Here are some helpful tips for self-servicing your timing belt.
When timing belts are wearing out, they can cause a noise. This noise is usually due to impact, where the belt tooth engages with the pulley. While the noise isn’t particularly annoying, it can be damaging over time. The second noise that you may hear is called air volume displacement. It occurs when air fills the space between the belt and the pulley and increases with the speed of the engine.
In addition to timing belts, timing gears and chains are often inaccessible, with their hidden mechanisms. The year and type of engine will determine which type you have, but each type is susceptible to wear and tear. Timing gears and timing belts are usually coated in engine oil for protection. Lubricating them regularly will ensure that they work as they are supposed to. These belts can also be driven by other components in the engine, which will require lubrication.
Oil leaks can lead to timing belt failure. If you notice a leak in the oil, try to identify it as soon as possible. Getting your timing belt replaced will prevent downtime caused by engine failure. You may also notice clunks, grinding noises, and knocking sounds under the vehicle. These are common signs that your timing belt needs lubrication. You can reduce the chances of these problems by regularly changing the engine oil and making sure it is of high quality.

China Custom Auto Bearing Belt Tensioner Pulley Part Number 1079173 1079173 Vkm14108 for CZPT Fiesta and Mondeo near me factory China Custom Auto Bearing Belt Tensioner Pulley Part Number 1079173 1079173 Vkm14108 for CZPT Fiesta and Mondeo near me factory

China factory Chinese Aftermarket Auto Parts 17540-50m40 Belt Tensioner Pulley for Suzuki wholesaler

Product Description

Chinese Aftermarket Auto Parts 17540-50M40 Belt Tensioner Pulley For Suzuki

 

Product Specification:

OEM No: 17540-50M40
Apply To:

For Car
Brand: FENGMING
Condition: Brand New
Stock Availability: Yes
Minimum Order QTY 10PCS
OEM Order Acceptability: Yes
Small order Lead Time: 3-7 days
Large Order Lead Time: 15-30 days
Quality Warranty 12 months
PACKAGING As neutral or as customer’s request, FENG MING PACKING
Payment Methods: Paypal, Western Union, Bank T/T, L/C
Shipment Methods: DHL, UPS, TNT, FedEx, Aramex, EMS, Air Cargo, Sea Cargo

Types of V-Belts and Their Properties

A v-belt’s inside length and pitch are determined by measuring along the bottom side. The included angle of a v-belt is measured from its flanks when it is extended. Most v-belt sections are 40 degrees. There are different types of v-belts, and the dimensions of each are standardized by different organizations. This article will introduce the different types of v-belts and their properties.
belt

Notched v-belts reduce bending stress

Notched V-belts reduce bending stress by reducing the axial length of the belt by 2 or more notches. These notches are characterized by different profiles, which differ in the pitch angle and the inside length. ISO and DIN standards are followed by the manufacturers of these belts. Notched v-belts are used on industrial machinery in countries other than the US.
Compared to the standard V-belts, notched ones are designed to resist bending stress better and offer better heat dissipation. They also last longer and run cooler than standard V-belts. Furthermore, they are about 2 percent more energy efficient than their standard counterparts. Therefore, notched V-belts are a viable replacement for standard V-belts.
Notched V-belts are commonly used in industrial applications because of their low price, ease of installation, and availability of many sizes. Another advantage of notched V-belts is that they provide more wedging force and higher load capacity. Notched V-belts have a wider v-groove than flat ones, which makes them more effective for heavy-duty applications.
Notched V-belts also provide better traction. They reduce bending stress, which is beneficial for preventing fatigue and tearing of v-belts. Additionally, v-belts can be installed in an existing equipment to add more performance. And with proper maintenance and installation, notched V-belts will provide trouble-free service for many years to come.

Ribbed v-belts reduce heat dissipation

Various kinds of v-belts are available for varying applications. The more popular types are the fractional horsepower and the double-V. Fractional horsepower v-belts are designed for light-duty applications, such as machine shop equipment and household appliances. The common sectional names are 2L, 3L, 4L, and 5L. The L in each of these belts refers to the top width of the belt, multiplied by 1 eighth inch.
Unlike conventional belts, ribbed v-belts are flexible, making them ideal for use in vibrating loads. They reduce heat dissipation and can be ordered in single or multiple sets to match your application. However, ribbed v-belts should not be mounted on deep-groove sheaves, as this can cause the belt to turn over. If you use deep-groove sheaves, the risk of rupture is very high. Deep-groove sheaves can also cut banded belts. Extremely worn sheaves can also cause the belt to rip.
The 2 types of ribbed v-belts differ in their construction and application. While both types have trapezium cross-sections, they are similar in that they are made of polyurethane or other durable materials. Ribbed v-belts have an additional layer of fabric on the elastomer core for reduced noise and better heat dissipation.
Ribbed v-belts are available in a variety of sizes, including trough v-belts. Their cross-sections are categorized by their top and bottom widths and depths. The included angle of most v-belt sections is approximately 40 degrees. Different types of v-belts have different cross-sections, and these cross-sections are standardized by various organizations.
As the load increases, a ribbed v-belt will wedge into the groove and decrease the amount of friction needed to maintain the correct torque. Flat belts can track off the pulleys due to friction. However, V-belts are more stable and require less width than flat belts. The main advantage of ribbed v-belts is their increased efficiency.
The global-local finite-element model is also used to calculate the maximum and minimum J-integrals during a belt’s running cycle. The data is then used to evaluate the durability of ribbed v-belts in various applications. The numerical models used for the calculations involve a ribbed V-belt with 5 full ribs.
belt

Cogged v-belts increase lateral rigidity to reduce belt whip

Cogged v-belts are designed for maximum performance and durability on even the harshest drive systems. These belts are made from high-modulus polyester cords that resist hardening and stretch and provide superior balance and strength. They also feature raw-edge sidewalls to reduce slip and drive vibration. In addition, they have specially-formulated rubber compounds for oil resistance. CZPT Cog-Belt offers substantial savings in downtime, energy consumption and horsepower.
A double cogged v-belt combines the benefits of cogged and double vee-belts. Its bonded reinforced tie band offers enhanced flexibility and reduces belt whipping in multiple-belt drives. Double cogged v-belt dimensions vary depending on the standards of the manufacturer. Regardless of the type, you’ll want to use a belt that is aligned correctly.
Standard v-belts are also known as wrapped or raw edge v-belts. Wrapped V-belts feature fabric covers above and beneath the cord to increase lateral rigidity and reduce belt whip. Cogged V-belts also have fabric covers to prevent wear on the core and increase the belt’s operating temperature. They’re ideally suited for applications that require high-temperature operation.
Cogged V-belts can significantly decrease energy consumption and improve power transmission capabilities. They also have a bias-cut cover stock that provides axial and lateral stability while preserving the cord integrity. A fiber loaded cogged construction offers optimum flexibility while minimizing heat buildup. It can be installed on any type of drive, including chain conveyors and industrial-grade machines.
The two-layer tie-band permanently bonds multiple belts together. This provides maximum cord support, heavy shock absorption, and stability. The belts are also engineered with patented banding processes that eliminate belt turnover and distribute load evenly across the drive. CZPT Cog-Band Belts minimize belt whip and provide stability. They also minimize belt turnover and rollover in heavy-duty industrial applications.
A classic v-belt is the most common and economical belt. Its nominal dimensions are 1/2″ to 1-11/2″ wide and 16″ to 400 inches long. The width is usually 40 degrees. Different organizations use different cross-sections to classify v-belts. The following table provides a general comparison of the 2 types. The Cogged V-Belt is designed to reduce belt whip by increasing the lateral rigidity of the belt.
belt

Cogged v-belts provide superior environmental resistance

The patented design of the Dayco V-Belt provides maximum power transmission while combining the benefits of a cogged belt and raw-edge construction. The belt’s top cogged design helps increase air flow around it, preventing deterioration and extending its useful life. The belt’s three-ply design features neoprene impregnated fabric for superior durability and a specially-formulated polyester cord for increased strength and stability.
A variety of v-belts are available, with cogged and notched versions presenting unique characteristics. Cogged V-belts are more flexible than uncogged versions and feature ‘X’-shaped grooves for enhanced heat dissipation. Cogged V-belts are interchangeable with conventional v-belts, although their ‘X’ design is most common. Hexagonal v-belts are a popular option for applications where traction is needed.
Another type of Cogged V-belt is designed specifically for outdoor power equipment. This v-belt is brown, with smooth clutching covers. Its aramid cord is very strong and provides superior durability in adverse conditions. Cogged V-belts can withstand severe shock loads and are therefore ideal for outdoor power equipment. Furthermore, they offer superior environmental resistance, minimal stretch, and a long service life.
A Cogged V-belt is composed of tensile cords that are supported by a rubber stock. Different manufacturers use different synthetic rubber stocks for this purpose. These materials help to extend the belt’s operating temperature range and resist premature failure. In addition to tensile cords, the belt’s body is covered with a fabric cover. The fabric is treated to form a chemical bond with the core materials, which allows it to withstand constant bending.

China factory Chinese Aftermarket Auto Parts 17540-50m40 Belt Tensioner Pulley for Suzuki wholesaler China factory Chinese Aftermarket Auto Parts 17540-50m40 Belt Tensioner Pulley for Suzuki wholesaler

China wholesaler Idler Pulley 6112340193 Belt Tensioner for Mercedes 6112340193 W204 W221 E300 Metris E550 Tensor De Tiempo/ Tensor De Alternador /Tensor De Correa near me factory

Product Description

Product spections :

Mercedes-Benz CLS63 AMG S 4Matic Sedan 4-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz CLS550 4Matic Sedan 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz CLS550 Base Sedan 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E300 4Matic Sedan 4-Door 2.0L 1991CC l4 GAS DOHC Turbocharged
Mercedes-Benz E300 Base Sedan 4-Door 2.0L 1991CC l4 GAS DOHC Turbocharged
Mercedes-Benz E550 Base Convertible 2-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E550 Base Coupe 2-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz G63 AMG Base Sport Utility 4-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz GLS550 4Matic Sport Utility 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz Metris Base Mini Cargo Van 4-Door 2.0L 1991CC l4 GAS DOHC Turbocharged
Mercedes-Benz Metris Base Mini Passenger Van 4-Door 2.0L 1991CC l4 GAS DOHC Turbocharged
Mercedes-Benz S63 AMG Base Convertible 2-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz S63 AMG Base Coupe 2-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz S63 AMG Base Sedan 4-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz S550 4Matic Coupe 2-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz S550 4Matic Sedan 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz S550 Base Convertible 2-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz S550 Base Sedan 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz SL550 Base Convertible 2-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz SLC300 Base Convertible 2-Door 2.0L 1991CC l4 GAS DOHC Turbocharged
Mercedes-Benz C350e Base Sedan 4-Door 2.0L 1991CC l4 ELECTRIC/GAS DOHC Turbocharged
Mercedes-Benz CLS63 AMG S 4Matic Sedan 4-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz CLS550 4Matic Sedan 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz CLS550 Base Sedan 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E63 AMG S 4Matic Sedan 4-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E63 AMG S 4Matic Wagon 4-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E250 Bluetec 4Matic Sedan 4-Door 2.1L 2143CC 131Cu. In. l4 DIESEL DOHC Turbocharged
Mercedes-Benz E250 Bluetec Sedan 4-Door 2.1L 2143CC 131Cu. In. l4 DIESEL DOHC Turbocharged
Mercedes-Benz E550 Base Convertible 2-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E550 Base Coupe 2-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz G63 AMG Base Sport Utility 4-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz GL550 4Matic Sport Utility 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz Metris Base Mini Cargo Van 4-Door 2.0L 1991CC l4 GAS DOHC Turbocharged
Mercedes-Benz Metris Base Mini Passenger Van 4-Door 2.0L 1991CC l4 GAS DOHC Turbocharged
Mercedes-Benz S63 AMG Base Coupe 2-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz S63 AMG Base Sedan 4-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz S550 4Matic Coupe 2-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz S550 4Matic Sedan 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz S550 Base Sedan 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz SL550 Base Convertible 2-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz SLK300 Base Convertible 2-Door 2.0L 1991CC l4 GAS DOHC Turbocharged
Mercedes-Benz CLS63 AMG S 4Matic Sedan 4-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz CLS550 4Matic Sedan 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz CLS550 Base Sedan 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E63 AMG 4Matic Sedan 4-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E63 AMG S 4Matic Sedan 4-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E63 AMG S 4Matic Wagon 4-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E250 Bluetec 4Matic Sedan 4-Door 2.1L 2143CC 131Cu. In. l4 DIESEL DOHC Turbocharged
Mercedes-Benz E250 Bluetec Sedan 4-Door 2.1L 2143CC 131Cu. In. l4 DIESEL DOHC Turbocharged
Mercedes-Benz E550 Base Convertible 2-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E550 Base Coupe 2-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz GL550 4Matic Sport Utility 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz GLK250 Bluetec 4Matic Sport Utility 4-Door 2.1L 2143CC 131Cu. In. l4 DIESEL DOHC Turbocharged
Mercedes-Benz S63 AMG Base Coupe 2-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz S63 AMG Base Sedan 4-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz S550 4Matic Coupe 2-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz S550 4Matic Sedan 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz S550 Base Sedan 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz SL550 Base Convertible 2-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz CLS63 AMG 4Matic Sedan 4-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz CLS63 AMG S 4Matic Sedan 4-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz CLS550 4Matic Sedan 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz CLS550 Base Sedan 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E63 AMG 4Matic Sedan 4-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E63 AMG 4Matic Wagon 4-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E63 AMG S 4Matic Sedan 4-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E63 AMG S 4Matic Wagon 4-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E250 Bluetec 4Matic Sedan 4-Door 2.1L 2143CC 131Cu. In. l4 DIESEL DOHC Turbocharged
Mercedes-Benz E250 Bluetec Sedan 4-Door 2.1L 2143CC 131Cu. In. l4 DIESEL DOHC Turbocharged
Mercedes-Benz E550 4Matic Sedan 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E550 Base Convertible 2-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E550 Base Coupe 2-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz GL450 Base Sport Utility 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz GL550 4Matic Sport Utility 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz GLK250 Bluetec 4Matic Sport Utility 4-Door 2.1L 2143CC 131Cu. In. l4 DIESEL DOHC Turbocharged
Mercedes-Benz S63 AMG Base Sedan 4-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz S550 4Matic Sedan 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz S550 Base Sedan 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz SL550 Base Convertible 2-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz CLS63 AMG Base Sedan 4-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz CLS550 4Matic Sedan 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz CLS550 Base Sedan 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E63 AMG Base Sedan 4-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E63 AMG Base Wagon 4-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E550 4Matic Sedan 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E550 Base Convertible 2-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E550 Base Coupe 2-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz GL450 Base Sport Utility 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz GL550 4Matic Sport Utility 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz GLK250 Bluetec 4Matic Sport Utility 4-Door 2.1L 2143CC 131Cu. In. l4 DIESEL DOHC Turbocharged
Mercedes-Benz SL550 Base Convertible 2-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz CLS63 AMG Base Sedan 4-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz CLS550 4Matic Sedan 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz CLS550 Base Sedan 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E63 AMG Base Sedan 4-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E63 AMG Base Wagon 4-Door 5.5L 5461CC 333Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E550 4Matic Sedan 4-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E550 Base Convertible 2-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged
Mercedes-Benz E550 Base Coupe 2-Door 4.7L 4663CC 285Cu. In. V8 GAS DOHC Turbocharged

Description :

1. The tensioner is a belt tensioner used in the automobile transmission system. The tension pulley is mainly composed of a fixed shell, a tension arm, a wheel body, a torsion spring, a rolling bearing and a spring sleeve. It can automatically adjust the tension force according to the different tightness of the belt to make the transmission system stable, safe and reliable.

2. The main function of the tensioner bearing is to support the mechanical rotating body.

3.Reduce the friction coefficient during its movement and ensure its rotation accuracy.

4.Change sliding friction into rolling friction.
 

Replacing a Failing Drive Belt Tensioner

A failing drive belt tensioner can be extremely costly. Here’s what to look for and what to do if you suspect yours is bad. In addition, you’ll learn how to identify Idler pulleys and repair it yourself. If the tensioner is failing, you should replace the belt, as well as the Idler pulleys and shaft bearings. But what if the tensioner isn’t faulty?
belt

Symptoms of a bad or failing drive belt tensioner

If your car’s drive belt is not moving smoothly, the pulley may be at fault. Ideally, the tensioner pulley should move away from the engine when the car starts. However, if it stays put or starts to move toward the engine, it’s time to replace the tensioner. The belt may also start to exhibit different wear patterns, such as the uneven wear of the sprockets, bearings, and springs.
If the serpentine belt begins to look loose and the engine loses its luster, the problem is most likely the bad drive belt tensioner. This issue will result in engine vibration. A faulty drive belt tensioner may also lead to a faulty spark plug, which prevents fuel from burning in the combustion chamber. This issue will likely require an engine diagnostic tool, such as an OBD2 scanner, to determine the cause of the check engine light.
Another sign that your drive belt tensioner is failing is a chirping noise. This noise can occur intermittently or constantly, and it may signal a problem with the pulley. In some cases, a faulty pulley may even cause your engine to misfire. Additionally, you may notice that the engine won’t start, even if you engage the starter motor.
In addition to the noise that may come from a failing tensioner, the bad belt tensioner may cause your serpentine to fail. In addition to the noise, this can also lead to overheating of the engine, which can result in costly damages. In addition to causing engine damage, a bad belt tensioner won’t reserve the minimum tension it needs to do its job and may even exceed it, causing the belt to wear out much faster.
If you notice any of these symptoms, it may be time to replace the drive belt tensioner. You can find a replacement OEM part online at a discounted price, as they’re available in wholesale quantities. A Mazda engine typically has no other parts blocking the serpentine belt path, so you can easily find the part you need. After replacing the drive belt tensioner, you’ll need to replace the serpentine belt as well.

Cost to replace a drive belt tensioner

Depending on the location and type of vehicle, replacing a drive belt tensioner can cost between $235 and $267. Some repairs may require other parts, such as a serpentine belt or tensioner housing. RepairPal’s Fair Price Estimator can help you get an accurate estimate for your particular vehicle. You can also contact HomeX, a virtual repair shop that can fix simple issues like loose drive belt tension.
It’s a relatively simple DIY job for most cars. An experienced mechanic will be able to replace the belt in a half hour or less, depending on the type of car and how many parts are affected. Depending on the complexity of the repair, the labor to replace the drive belt tensioner could cost anywhere from $50 to $170. The labor to replace the drive belt tensioner is typically included in the quoted price, but some auto shops may charge more to replace other car parts as well.
Replacing the drive belt tensioner is a relatively easy task. While the process might take an hour or more, it will be worthwhile in the long run. Regular inspections can prevent costly repairs by identifying problems before they cause major damage. A car’s belt is essential to the operation of the engine and can’t be operated without it. Changing it can save you money, as it will save you from spending extra on unnecessary parts.
Thankfully, there are plenty of tools available to help you replace your drive belt. While it may not be the easiest repair, it will still cost less than a mechanic’s service call. It is better to replace the belt early than to wait for the vehicle to break down, as this will prevent more expensive parts from breaking. You may also consider investing in a premium belt, which will give you twice as much mileage as a cheaper one.
While a drive belt tensioner is generally considered a wear-and-tear item, it is a part that should last the entire life of the vehicle. You can expect to replace the drive belt tensioner no earlier than 125,000 miles, but it is better to do it early if your car isn’t that old. And it doesn’t hurt to check the owner’s manual for directions on how to replace the drive belt tensioner.
belt

Idler pulleys

Idler pulleys may seem like a minor part of your car, but their important job is to keep various components in good working order. Fortunately, they are inexpensive and don’t need much maintenance. If 1 pulley fails, it is best to replace all of them. However, it is not always easy to check idler pulleys yourself. It’s recommended that you visit a professional auto repair shop that is ASE-certified to inspect and replace the idler pulley.
Depending on the size and type of idler pulleys you need, you’ll have to purchase 2 or 3 pieces. You’ll need to purchase a pair of pliers for this part, as well as a tensioner pulley wrench. The cost of a replacement idler pulley will vary by make and model, but you can expect to pay between $40 and $200. These prices don’t include taxes or fees. Because they are so essential to drive belts, it’s worth investing in 1 or two.
Idler pulleys are a vital part of a car’s engine. They’re found underneath the hood and are usually 2 to 4 inches in diameter. They run over a roller that’s used to tension the belt. The belt is wrapped around a series of engine parts, and the idler pulleys are a complement to each other. You may not need an idler pulley on your car, but your mechanic will install it for you if you don’t.
The idler pulleys for a belt tensioner are crucial parts of your car’s engine. If they are worn down, the belt is likely to move loosely over them. Corrosion may also make the idler pulley move less freely. If the idler pulley is slipping, the belt may jump over the pulley, and the squealing noises will indicate a serious problem.
The idler pulley is a pivotal part of the engine’s power train. It redirects the path of the serpentine and timing belts, so that they can make optimal contact. The larger the contact patch, the more power the belt will transfer. The idler pulley can also improve the vehicle’s performance. It is a vital part of the engine, so make sure you check it frequently and install it correctly.
belt

Repairing a drive belt tensioner

Replacing a drive belt tensioner is relatively simple. While your belt may need to be replaced, other parts of your engine may also need to be fixed. Typically, the tensioner will be replaced along with the pulley, as both parts are prone to malfunction. Replacing the drive belt tensioner is a fairly straightforward job, and it should only take about an hour or two. By following these simple steps, you can save yourself a lot of money and time.
You can detect the problem by observing the belt glazing. Typically, it occurs when the tensioner does not have enough spring tension. Another sign of a failed component bearing is excessive arm oscillation. Excessive chattering and oscillation indicate that the damper has worn out. If you notice excessive oscillation, you should replace the tensioner pulley. Otherwise, you might be dealing with a defective bearing.
A damaged or out-of-adjusted drive belt will make a squealing noise. This is due to the belt slipping on the pulleys. It is most noticeable when the car is first started in the morning. A damaged drive belt will also be hard to manipulate. The new belt should be the same length and width as the old one. You can check the tensioner by pulling the belt and compressing it.
A worn-out drive belt tensioner will result in unusual noise, excessive wear, and a loose belt. This is especially affecting if the car is equipped with a serpentine belt. The drive belt tensioner has a roller bearing that can wear out, which will cause a squealing noise or even cause the belt to roll off entirely. Because of its important role in engine operation, it is vital to check the condition of the drive belt tensioner on a regular basis.
While replacing a drive belt tensioner may seem like a simple DIY project, you should consult a mechanic before undertaking the work. The parts and labor costs of a drive belt tensioner repair can range from $140 to $400, and you should allow an hour for this repair. If you are not comfortable performing the repair yourself, you can always hire a mechanic to do it for you. In most cases, a drive belt tensioner replacement will cost approximately $70 to $80 and take about an hour.

China wholesaler Idler Pulley 6112340193 Belt Tensioner for Mercedes 6112340193 W204 W221 E300 Metris E550 Tensor De Tiempo/ Tensor De Alternador /Tensor De Correa near me factory China wholesaler Idler Pulley 6112340193 Belt Tensioner for Mercedes 6112340193 W204 W221 E300 Metris E550 Tensor De Tiempo/ Tensor De Alternador /Tensor De Correa near me factory

China Custom Tensioner Pulley 1345A090 Belt Tensioner for CZPT with Free Design Custom

Product Description

 

Item Mitsubishi Tensioner Pulley 1345A090 Belt Tensioner
Car Fitment Mitsubishi
Usage Auto Parts Type Belt Tensioner
Package 1,barreled package+outer carton+pallets 
2,plastic bag+single box+outer carton+pallets 
3,tube package+middle box+outer carton+pallets 
4, According to your’s requirement
Quality Control We have a complete process for production and quality assurance to make sure our products can meet your requirement.
1. Assembly
2. Windage test
3. Cleaning
4. Rotary test
5. Greasing and gland
6. Noise inspection
7. Appearance inspection
8. Rust prevention

 

Detailed Photos

Carfitment and part number

OEM:

MITSUBISHI : 1345A090

Reference No.

CAUTEX : 754832

CAUTEX : 754832

FEBEST : 0490-CX6A

STC : T458248

Advantages
 

1. Customized Brand 

2. High quality

3. Competitive price

4. On-time delivery 

5. CZPT color box packing or according to client’s requirements

6. More reliable and stable, durable in use, long operating life

7. Genuine parts, strict QC system, quality guarantee

8. Durable  use

9. Adopted superior material, ensure the product has a super hardness, high impact resistance, and abrasion resistance

What we can do?

To help customers save time and cost, we supply a one-stop service.
1. select qualified product factory
2. gather goods from different factory
3. inspect the quality
4. shipping service
5. design service, we have professional designers who can help customers design the package.

 

 

Company Profile

We are a professional supplier of auto bearings, our products include wheel bearing, hub assembly, clutch release bearing, belt tensioner, etc. We supply a one-stop service for customers. To help customers save time and cost, we will help customers gather products from many different suppliers and inspect the quality. If you have any demand, please contact us in time, we will ensure the best price and the highest quality

 

Packaging & Shipping

Packaging Details 1 piece in a single box
50 boxes in a carton
20 cartons in a pallet
Nearest Port ZheJiang or HangZhou
Lead Time For stock parts: 1-5 days.
If no stock parts:
<200 pcs: 15-30 days
≥200 pcs: to be negotiated.

 

FAQ

If you have any other questions, please feel free to contact us as follows:

 

Q: Why did you choose us?

1. We provide the best quality bearings with reasonable prices, low friction, low noise, and long service life.

2. With sufficient stock and fast delivery, you can choose our freight forwarder or your freight forwarder.

 

Q: Do you accept small orders?

100% quality check, once your bearings are standard size bearings, even one, we also accept.

 

Q: How long is your delivery time?

Generally speaking, if the goods are in stock, it is 1-3 days. If the goods are out of stock, it will take 6-10 days, depending on the quantity of the order.

 

Q: Do you provide samples? Is it free or extra?

Yes, we can provide a small number of free samples. 

 

Q: What should I do if I don’t see the type of bearings I need?

We have too many bearing series numbers. Just send us the inquiry and we will be very happy to send you the bearing details.

Q: Could you accept OEM and customize?
A: Yes, we can customize for you according to sample or drawing, but, pls provide us technical data, such as dimension and mark.

Contact Us 

What to Look for in a Belt Tensioner

If you notice the power steering, air conditioning, or power steering stops working, chances are that your belt tensioner has been compromised. A compromised belt tensioner can be completely destroyed overnight, or it can last for a long time before it breaks. Either way, you should never drive with a faulty belt tensioner. It’s far better to have it replaced before the engine shuts down completely. In addition, replacing a belt tensioner will prevent other complications, such as power steering or air conditioning, from occurring.
belt

Misaligned idler pulley

If the tensioner arm is not rotating freely or has an abnormal chirping noise, it could be the result of a misaligned idler pulley. If this is the case, replace the idler. If the idler does not move, you may need to adjust the accessory mount points or use a laser alignment tool. The tensioner arm is only 1 part of the tensioner.
A misaligned idler pulley on a belt tensioner is usually the cause of a squeaking noise. If this noise continues even after a replacement of the belt, it’s time to replace the whole belt. A misaligned idler pulley can also be the cause of premature belt wear. If the idler pulley is out of alignment, it could also cause the belt to wear too fast and lead to the premature failure of the timing belt.
The tensioner pulley is made of nylon, steel, or plastic. It may be flat or grooved. Before replacing it, check for any cracks, dents, or debris on the pulley’s surface. Plastic pulleys may have broken sidewalls. If the idler pulley is worn out, you might also notice squealing noises when the vehicle is in motion.
The misalignment of a belt is most pronounced when the span between the 2 pulleys is short. When the span is long, however, diagnosing the problem becomes more complicated. Small degrees of offset may not be visible to the naked eye, but a laser alignment tool can help identify these subtle variations. In order to identify a misaligned idler pulley on a belt tensioner, you must first determine its cause.
When the tensioner’s idler pulleys are out of line, a belt tensioner will not be able to properly adjust the torque that the belt is under. This may result in squealing noises. If this is the case, it is time to call a mechanic. He or she will be able to determine the cause and correct it. If you suspect the problem, your next step is to replace the idler pulley on the belt tensioner.
If the ribbed belt is not properly aligned, you may have a misaligned idler pulley. To fix the misalignment, locate the belt adjustment bolt underneath the hood. You should be careful not to damage the alternator or battery terminal while doing this task. If you do accidentally connect the battery positive to the earth, you might be able to damage the ribbed belt and ruin your vehicle’s timing.
Besides a misaligned idler pulley on the belt tensioner, another problem may be the alternator’s serpentine belt. If your car’s alternator belt is not aligned properly, you could have misaligned the alternator’s pulley or a worn-out bearing. Regardless of the cause of your problem, you should have the belt inspected.
belt

Bad idler pulley

Having a Bad Idler Pulley on a Belt Tensioner? If this sounds familiar, then it’s probably time to change it. Idler pulleys slowly take hits while the engine is running, causing the belt to wrap and bend. Eventually, the belt will slip, and a new idler pulley should be installed to ensure optimal tension. But before you spend a dime on a new one, let’s talk about what to look for.
Symptoms of a Bad Idler Pulley: If the noise persists, there is a problem with the idler pulley or its bearing. These parts wear out over time and may eventually cause a cracked idler pulley or serpentine belt. Not only will the idler pulley create an irritating noise, but it will also damage the belt itself, leading to overheating, stalled engine, and even damage the head gaskets. Thankfully, a Bad Idler Pulley on a Belt Tensioner is easily replaced and will only cost about $40.
Although the Idler Pulley is not the most popular component on a car, it’s a critical part that ensures that the engine runs smoothly. It’s easy to overlook this part, but its failure can make it impossible for your vehicle to operate at its optimal level. Moreover, a Bad Idler Pulley on a Belt Tensioner will cause your engine to malfunction, so it’s essential that you check it at regular intervals.
If you notice a squealing noise while driving, the Idler Pulley is likely the culprit. Because of friction between the engine belt and idler pulley, the engine belt rubs against the pulley, causing it to squeak and make a clicking noise. This squealing noise will continue until the problem is repaired or replaced. It’s time to start addressing the problem before it becomes too late.
If you notice the tensioner pulley moving away from the engine, it’s most likely that the pulley is malfunctioning. A belt that is loose or slack may make it difficult to start the car, or your engine may even overheat. If this occurs, it’s crucial to replace the Idler Pulley as soon as possible, because a Bad Idler Pulley on a Belt Tensioner can seriously damage your vehicle.
The Idler Pulley facilitates the motion of the engine belt. It serves as a smooth rotating point that allows the belt to loop without a barrier. Over time, this part of the system will begin to show signs of wear and tear, and replacement is vital to protect your engine, serpentine belt, and other accessories. An early warning sign of a problem is a squealing sound coming from the engine area.
belt

Broken tensioner arm

The belt tensioner is a piece of machinery that is used to keep the belt tight. If this part breaks, you can easily repair it yourself using a long-handled ratchet, serpentine belt tool, or a socket. To repair the tensioner, simply remove the drive belt from the pulley and rotate it to release tension. Check for roughness, resistance, or binding of the drive belt.
Noises caused by the tensioner are a sign of a damaged component or excessive oscillation. These noises are usually caused by worn internal components or the tensioner’s pivot bushing. In some cases, the vibration damping system or a worn-out alternator pulley could also be to blame. If this is the case, replace the pulley and tensioner together. To check the condition of your belt tensioner, follow these steps.
In addition to worn-out springs, a loose or broken pivot arm could be causing your belt to misalign. A worn-out tensioner pulley bushing will also cause vibrations, noise, and seizing. Lastly, a broken tensioner spring could be preventing the belt from maintaining proper tension. Broken springs are also prone to loss of tension due to heat. Damaged tensioner housing can also affect belt tension.
Once the belt is installed, you need to check the condition of the pulley and the tensioner arm. Make sure that the pulley is moving and that the arm is moving smoothly with the cranking and releasing. If the arm is wobbling, the tensioner is failing. If the pulley wobbles or excessive chattering occurs, the tensioner is failing. It can also be seized or jammed.
If the tensioner arm has broken, replace it. Replacing the tensioner can be a tedious task. Be sure to use a suitable tool to tighten the pulley and tensioner. If you are not sure of how to replace the pulley, try using a serp belt tool. Another good option is to purchase a 3/8 drive ratchet. If you don’t have this tool, you can use a long 3/8 extension and a deep socket.
The belt tensioner assembly can fall off the engine, causing damage to the timing belt. If you are replacing it, you must replace it with a new one, and tighten all of the mounting bolts before reinstalling it. To avoid further damage to the engine, ensure you replace the belt with a new tensioner and a new belt. The tensioner is bolted to the engine’s timing cover, so make sure you carefully tighten the bolts when replacing it.

China Custom Tensioner Pulley 1345A090 Belt Tensioner for CZPT with Free Design CustomChina Custom Tensioner Pulley 1345A090 Belt Tensioner for CZPT with Free Design Custom

China wholesaler 0829A7 082997 082966 Timing Belt Tensioner Roller Pulley Fits for Peugeot 206 307 807 with Free Design Custom

Product Description

Product Description

Belt tensioners are extremely important in the proper operation of the accessory belt drive system. A tensioner maintains the correct amount of tension on the belt at all times throughout its duty cycle. It also helps protect other components such as the alternator and water pump from undue stress and premature failure. In addition, a tensioner is a relatively inexpensive part to replace. So, every time you replace a multi-ribbed belt, be sure to replace the tensioner at the same time.

Furthermore, when a tensioner has reached the end of its service life CZPT recommends that all wear parts are replaced at the same time to ensure the best long-term solution.

THE IMPORTANCE OF CORRECT BELT TENSION

If the belt tension is too low, the belt will slip causing noise, extremely high temperatures and premature belt wear, all of which can lead to the poor functioning of the belt-driven accessories. If the tension is too high, this will cause excessive wear to the belt-driven accessories.

Product Parameters

Item 0829A7 082997 082966 Timing Belt Tensioner Roller Pulley Fits for PEUGEOT
Parameter

Outer Diameter : 61.8 mm
Height : 29 mm
Package 1,barreled package VKM38.1 BMW
11281748131 VKM38.2 BMW
11311721263 VKM18 BMW
11311727611 VKM18 BMW
24410-235 Hyundai
9571176 VKM7 Opel / GM
9158 Opel / GM
94149432 VKM15210 CR1883 F-123645 Opel / GM
97571530 VKM15213 CR1811 F-123806 Opel / GM
9128656 VKM15216 CR1810 F-232481 Opel / GM
14510-PM7- HONDA
13404-PT0- HONDA
14510-PR3- HONDA
MD192731 VKM75 Mitsubishi
MD315265 VKM75 Mitsubishi
MD128765 VKM75 Mitsubishi
Y701-12-730 VKM25210 CR1683 F-123806 Mazda
KLY2-12-SJ0 VKM74 Mazda
R201-12-7 Mazda
RFC6-12-7 Mazda

A wide range of applications:

• agriculture and forestry equipment
• automotive and industrial gearboxes
• automotive and truck electric components, such as alternators
• electric motors
• fluid machinery
• material handling
• power tools and household appliances
• textile machinery
• two Wheeler

Company Profile

Our Advantages

1.ISO Standard

2.Bearing Small order accepted

3.In Stock bearing

4.OEM bearing service

5.Professional Technical Support

6.Timely pre-sale service
7.Competitive price
8.Full range of products on auto bearings
9.Punctual Delivery
11.Excellent after-sale service
 

Packaging & Shipping

 

Packaging Details 1 piece in a single box
50 boxes in a carton
20 cartons in a pallet
Nearest Port ZheJiang or HangZhou
Lead Time For stock parts: 1-5 days.
If no stock parts:
<200 pcs: 15-30 days
≥200 pcs: to be negotiated.

 

FAQ

If you have any other questions, please feel free to contact us as follows:

 

Q: Why did you choose us?

1. We provide the best quality bearings with reasonable prices, low friction, low noise, and long service life.

2. With sufficient stock and fast delivery, you can choose our freight forwarder or your freight forwarder.

 

Q: Do you accept small orders?

100% quality check, once your bearings are standard size bearings, even one, we also accept.

 

Q: How long is your delivery time?

Generally speaking, if the goods are in stock, it is 1-3 days. If the goods are out of stock, it will take 6-10 days, depending on the quantity of the order.

 

Q: Do you provide samples? Is it free or extra?

Yes, we can provide a small number of free samples. 

 

Q: What should I do if I don’t see the type of bearings I need?

We have too many bearing series numbers. Just send us the inquiry and we will be very happy to send you the bearing details.

Q: Could you accept OEM and customize?
A: Yes, we can customize for you according to sample or drawing, but, pls provide us technical data, such as dimension and mark.

Contact Us 

Choosing a V-Belt

When choosing a v-belt, you should understand the characteristics of each type and how they affect the performance of your machine. Listed below are the characteristics of Cogged, Narrow profile, and wide v-belts. Learn about the advantages and disadvantages of each. Choose the right v-belt for your machine to maximize its performance. Learn about the different materials used to make v-belts and how they influence the performance of your machine.
belt

Narrow v-belts

While the flat belts are the most common type of v-belt, narrow v-belts are also a common option for industrial applications. These belts are similar to wedge belts in that they transmit heavier loads, but in a smaller form. Narrow v-belts are typically designated as 3V, 5V, and 8V and are denoted by their top width, multiplied by an eighth of an inch. Narrow v-belt sections conform to a wedge belt profile and are usually standardized by manufacturers. For example, section 3V corresponds to a wedge-type profile, while section 5V corresponds to SPB.
Both narrow and conventional v-belts are made of rubber stocks, which are generally composed of polymer or synthetic rubber. Fabric materials may be used to cover the stock material, adding a layer of reinforcement and protection. Narrow v-belts have a higher power rating than traditional V-belts. This is due to their greater depth-to-width ratio, which puts more of the reinforcing cord beneath the sheave.
The Wedge TLP ™ Narrow V-belt from Continental features a homogeneous one-piece design for maximum strength and long-term performance. These belts feature a high-denier cord and can handle significant horsepower increases. These belts are ideal for industrial applications. However, they are not as durable as their wider counterparts. The Wedge TLP is also an excellent choice for heavy-duty industrial applications.

Cogged v-belts

A key benefit of cogged v-belts is their ability to increase power output without sacrificing reliability. These belts are designed with precision-engineered cogs, which allow them to fit into smaller pulleys without reducing power output. Their raw-edge sidewalls and specially formulated EPDM rubber compound also help provide grip power. Cogged v-belts are manufactured by Carlisle(r) and offer several advantages over conventional belts.
The performance benefits of Cogged V-Belts are widely acknowledged. The company uses added-strength EPDM compounds in their belts to help reduce downtime and energy consumption. They are ideal for demanding applications such as power transmission. These belts are available in a variety of sizes and cross-sections. The section number of Cogged v-belts is H3V, H4V, and H5V.
The main difference between cogged v-belts and wedge belts is in the contact angle. While wedge and cogged v-belts have the same contact angle, the design and construction differs. Cogged v-belts typically include top and bottom layers of rubber, dampening rubber, tension cords, and top and bottom metal rings. Polychloroprene and polyester cords are common materials for the top and bottom layers, while aramid fibers are used for punishing applications.
Cogged v-belts are more flexible than traditional v-belts. Because of the slots on the belt surface, they reduce bending resistance. They are compatible with the same pulleys as standard v-belts, and run cooler and longer. They are also more efficient than standard V-belts. If you are considering a cogged V-belt for your application, it may be worth it to investigate the benefits of this belt type.
belt

Wide v-belts

Variable-speed v-belts are wider in cross section than classical v-belts. The design of variable-speed v-belts varies depending on the manufacturer, but generally features a parallel top and bottom surface. This type of v-belt wedges tightly into its pulley’s grooves, reducing power loss and slippage. This type of v-belt is best suited to applications where speed changes frequently.
High-performance Wide V-belts feature a fibre-reinforced EPDM rubber base. The resulting supercharged EPDM mix is better suited for applications where the belts are subject to higher temperatures. This type of drive belt can also replace existing drives with ease and efficiency. CZPT offers a wide range of drive belts for all applications. For applications where slack is an issue, wrapped V-belts are a smart choice.
Narrow-V-belts, on the other hand, have a more favorable height-to-width ratio. This means that a narrow-V belt can be smaller while still providing the same power transmission. These belts also have a lower mass, which reduces centrifugal forces and enables higher speeds. However, narrow-V-belts are prone to wear, but are still a popular choice in many applications.
In addition to being more durable, wrapped-V-belts have fabric-coated edges for better heat resistance. The material covering wrapped-V-belts also protects them from damage from friction and external contaminants. Unlike their rigid counterparts, these wide-V-belts have an improved lifespan and require less maintenance and downtime. These are excellent alternatives to conventional v-belts. So, what are the benefits of Wide-V-belts?

Narrow profile v-belts

When it comes to choosing the best V-belt for your needs, it is important to understand the differences between narrow profile and classical. Narrow profile V-belts are generally narrower in cross-section than classical v-belts. This makes them ideal for high-speed compact drives and light-duty applications. The following section details the differences between narrow and classical v-belts.
The tensile cords, or “cords,” are embedded into the rubber compound. These cords are the main power-transmitting component of a narrow profile v-belt. The tension cords are located at the pitch diameter of the belt cross-section and increase the tensile strength. They are typically made of steel, aramid fibers, or polyester. The core is usually made of polyurethane, but other materials can be used.
When measuring the v-belt’s width, it is important to understand the various sign-codes. Some v-belts have the wrong sign-coding schema. For example, a classical profile belt should be read as Lw = 3522 mm, while a narrow profile belt should be read as La=3553mm. A narrow profile v-belt has a steeper side-wall, which increases the wedging action. Moreover, the narrow profile v-belt has higher load capacity.
Despite their name, narrow profile v-belts are the most widely used and versatile type of v-belts. They are also the easiest to install. Their general size is similar to that of a wedge, and their number is derived from their numerical prefix. A narrow profile v-belt with a 3L300 part number is 3/8″ wide and 300.0 inches long.

Wide profile v-belts

Wide profile v-belts are designed for heavy-duty applications where extreme performance is required. They are ideal for such applications due to their high-flexural strength and shock-resistance. They also come with many benefits, including good noise-reduction, increased sturdiness, and easy maintenance. This article explores the features of wide profile v-belts and how they can benefit your business.
Classical v-belts have an internal dimensional metric marking called the “CZPT.” This identifies each specific belt. Generally, this number is a combination of the normal profile size designation letter and the internal length in inches. The inside length of the v-belt is indicated on the index of the v-belt. To begin installing the v-belt, mark the floor where it will be hung. Tape the end stop marker to the first stick.
Narrow v-belts are narrower than standard wide v-belts. They are also available in raw-edge cogged profiles and are intended for light-duty applications. Narrow V-belts are also available in 4 sizes. Compared to standard wide profile v-belts, narrow v-belts are most appropriate for high-speed, compact drives. However, wide profile v-belts are generally longer than narrow V-belts.
A v-belt is composed of different types of rubber and reinforcements. It undergoes tensile and compressive stresses on both sides. The top side of a v-belt experiences longitudinal tensile force, while the bottom side is subjected to compression against a pulley. Moreover, the included angle of a v-belt section is 40 deg. Various types of v-belts are available according to their cross-sections and performance specifications.
belt

Standard v-belts

If you are installing v-belts, you must know the right way to measure them. Many v-belts are mislabelled as classic or SPA. If you are unsure of which 1 to choose, you can refer to the standard v-belts index. The basic way to measure v-belts is by using a measuring tape or a cable tie. Using the right technique will ensure you get the right length.
A well-engineered V-belt is made from an elastomer core, which is a material that is resistant to abrasion. The elastomer core is usually composed of polyurethane, which has excellent flexural strength and shock resistance. In addition to the elastomer core, a fabric cover protects the core from wear and environmental forces. Its fabric cover is treated to form a chemical bond with the belt core, which increases the fabric’s resistance to constant bending.
The cross-section of a standard V-belt is commonly described as a trapezium, with its top and bottom sides parallel. Knowing the cross-section of a standard V-belt is essential in matching it with a pulley. It is also important to know how the v-belt is positioned on a pulley and how to select the right belt for the job.

China wholesaler 0829A7 082997 082966 Timing Belt Tensioner Roller Pulley Fits for Peugeot 206 307 807 with Free Design CustomChina wholesaler 0829A7 082997 082966 Timing Belt Tensioner Roller Pulley Fits for Peugeot 206 307 807 with Free Design Custom

China supplier Good Quality Timing Belt Tensioner Pulley Vkm31013 Apv2259 38903315p for Volkswagen Bora with Hot selling

Product Description

Quick view:

Description Good Quality Timing Belt Tensioner Pulley VKM31013 APV2259 38903315P For Volkswagen BORA
Material Chrome steel Gcr15, 65Mn, or 55, Aluminum
Application car makes For AUDI
For SKODA
For VW
Size Outer: 76 mm
Width: 21.4 mm
Position Engine parts
Weight 1.0 kg
Brand SI, PPB, or customized
Packing Neutral, SI, PPB brand packing or customized
OEM/ODM service Yes
Manufacture place ZHangZhoug, China
MOQ 100 PCS
OEM replacement Yes
Inspection 100%
Warranty 1 year or 40,000-50,000 KMS
Certificate ISO9001:2015 TS16949
Payment T/T, PayPal, Alibaba

Fit for:

For AUDI For AUDI A4 B5 Saloon (8D2) (11.1994 – 09.2001)
For AUDI A6 C5 Saloon (4B2) (01.1997 – 01.2005)
For AUDI A6 C5 Avant (4B5) (11.1997 – 01.2005)
For AUDI A4 B5 Avant (8D5) (11.1994 – 09.2001)
For AUDI A4 B6 Saloon (8E2) (11.2000 – 12.2004)
For AUDI A4 B6 Avant (8E5) (04.2001 – 12.2004)
For SKODA For SKODA Superb I Saloon (3U4) (12.2001 – 03.2008)
For Volkswagen For Volkswagen Passat B5 Saloon (3B2) (08.1996 – 12.2001)
For Volkswagen Passat B5 Estate (3B5) (05.1997 – 12.2001)
For Volkswagen Golf IV Hatchback (1J1) (08.1997 – 06.2005)
For Volkswagen Passat B5 GP Saloon (3BG, 3B3) (11.2000 – 05.2005)
For Volkswagen Passat B5 GP Estate (3BG, 3B6) (10.2000 – 08.2005)
For Volkswagen BORA (1J2) 1.9 TDI 1998-2005
For Volkswagen BORA Variant (1J6) 1.9 TDI 1999-2005

OE Numbers:
038903315D
038903315P
38145283
038145283A
38145299
38145283A
38903315D
38903315P

Reference:
For DAYCO: APV2259
For FEBI BILSTEIN: 18660
For GATES: T38306
For I-NA: 534001410
For OPTIMAL: 0-N1441
For S-KF: VKM31013

Packing and Delivery:

Work shop:

Exhibitions:

FAQ:
Q1.What is your shipping logistic?
Re: DHL, TNT, FedEx express, by air/sea/train.

Q2:What’s the MOQ?
Re: For the belt tensioner, The MOQ is always 100 sets. If ordering together with other models, small quantities can be organized. But need more time due to the production schedule.

Q3. What are your goods of packing?
Re: Generally, our goods will be packed in Neutral white or brown boxes for the hub bearing unit. Our brand packing SI & CZPT are offered. If you have any other packing requests, we shall also handle them.

Q4. What is your sample policy?
Re: We can supply the sample if we have ready parts in stock.

Q5. Do you have any certificates?
Re: Yes, we have the certificate of ISO9001:2015.

Q6:Any warranty of your products.
Re: Sure, We are offering a guarantee for 12 months or 40,000-50,000 km for the aftermarket.
 

Q7: How can I make an inquiry?

Re: You can contact us by email, telephone, WhatsApp, , etc.

 

Q8: How long can reply inquiry?

Re: Within 24 hours.

 

Q9: What’s the delivery time?

Re: Ready stock 10-15 days, production for 30 to 45 days.

 

Q10: How do you maintain our good business relationship?

Re: 1. Keep stable, reliable quality, competitive price to ensure our customer’s benefit;

2. Optimal lead time.

3. Keep customers updated about the new goods.

4. Make customers satisfaction as our main goal.

 

Q11: Can we visit the company & factory?

Re: Yes, welcome for your visit & business discussion.

 

What Is a V-Belt?

What is a v-belt? It is a rubber belt that is trapezium-shaped and has an elastomer core that holds the parts together. Its elastomer core is generally made of polyurethane and has good shock resistance and flexural strength. V-belts sometimes have 2 sections, 1 of which is a compression rubber and the other cushion rubber. They can be narrow or wide, depending on their use.
belt

Classical V-belts replace leather belts

Classical V-belts are a popular choice among truck drivers because they are more durable. They are typically made of polymer or rubber, with fibers from other materials added for reinforcement. These belts are a good replacement for leather belts and offer many benefits. They are durable, offer excellent temperature and oil resistance, and are easy to use. If you’re considering replacing your current belt, consider buying a replacement belt made of the same material.
Most classical V-belts are used individually and come in A and B sizes. They are rarely used in single-belt drives. Buying several A or B belts instead of 1 C belt can save money. The narrow V-belts also provide higher power ratings. This is due to their narrow profile, which places more of the reinforcing cord under the sheave. Narrow V-belts are ideal for heavy duty applications.
When you’re replacing an existing V-belt, you’ll need to measure its top width and circumference. Once you’ve determined these parameters, you’ll be able to select the right replacement belt. Make sure to take measurements of the belt’s dimensions and top width before ordering. Using these measurements will help you determine the best size for your new belt. You’ll be able to tell whether you need a larger or smaller belt after measuring the top width and circumference.
If you’re looking to replace your leather belt with a belt made of synthetic material, a Classical V-belt may be the right choice. Classical V-belts are available in many materials and are more durable than leather. And because they are so versatile, they are the perfect replacement for your current belts. You’ll be glad you did. So, don’t be afraid to experiment with this type of belt. They’ll work well in any setting, including heavy equipment.
When buying a Classical V-belt, be sure to check the dimensions and type of belt you choose. These are available in notched or cogged designs. Notches are a great way to reduce bending stress. Notches also help dissipate heat from the belt, a major factor in premature belt failure. Notched V-belts are designed to balance a combination of flexibility and tensile cord support. They are spaced properly to minimize cracking and undercord damage.
Unlike leather belts, Classical V-belts are made of synthetic materials. They are easy to install, have a wide range of sizes, and come in light to heavy-duty varieties. The V-belt’s trapezoidal shape helps it track in the grooves of pulleys and prevents it from slipping while in use. It also helps in reducing power loss, since it’s easier to grip the pulleys than leather.
belt

Narrow v-belts are more efficient

There are 5 basic types of V-belts. Their differences in cross-sectional size and power transmission make them superior to multiple single v-belts. The diagram below shows these types and how each differs from 1 another. The included angle of each belt is 40 degrees. The lower number indicates the more efficient version. Narrow V-belts are generally less expensive. Narrow v-belts are generally more efficient than wider belts.
There are several factors that influence a V-belt’s efficiency. Although the efficiency is high when a new belt is installed, the efficiency can drop to the low nineties. However, these belts are relatively resilient, and even with lower efficiency can function properly. Even if the efficiency of a V-belt is lower than it could be, it will still function. In fact, the higher the efficiency, the more energy it will save.
The first is the type of pulley. A narrow V-belt is more flexible than its wider counterpart. The belt pitch diameter is 32deg or 38deg. In addition, the belt can be cogged for added flexibility. In this way, the belt will not touch the bottom of the groove, but will only contact the inclined flanks. Without this wedge effect, the belt’s total friction force is higher. This means that it can transfer higher forces.
While a V-belt looks like a glorified rubber band, it has undergone tremendous technological development since it was first used in 1917. Synthetic rubber compounds and other cover materials have replaced rubber in the belt. New construction methods, tensile cord improvements, and cross-section profiles have resulted in a confusing variety of V-belts. Their differences, however, are based on the type of application for which they’re used.
Another type of V-belt is the raw edge variety. This type of belt is commonly used in manufacturing facilities. This type of belt requires less energy to operate. The raw edge also resists hardening. This is important since unmatched flexibility results in a smooth belt. Also, notched V-belts reduce vibration by 80%. Further, angular misalignment increases the risk of premature failure of a V-belt.
These belts differ in their overall design. While conventional V-belts are more common, narrow V-belts are more efficient and versatile. They are made of different types of rubber and reinforcements, which combine to create a trapezium-shaped cross-section. They can handle fractional loads and even 500 horsepower. Furthermore, their durability is largely dependent on their ability to withstand poor operating conditions.
Double-sided v-belts have unique features. These belts are used in applications with multiple pulleys. They can be operated clockwise or counter-clockwise. They can also be used to drive around multiple reverse bends. Further, they are more efficient and quieter than their counterparts. Finally, double-sided v-belts have 2 compression cores. The tension cord runs through both sections.
belt

Double cogged v-belts increase lateral rigidity to reduce belt whip

A double cogged v-belt is a hybrid of a traditional double versus a cogged vee-belt. These belts are useful for applications that require a large amount of flexibility without compromising durability. The double cogged design also allows the belt to follow a serpentine path. The varying dimensions of a double cogged v-belt depend on manufacturer standards.
A v-belt is measured by defining the centerline, the inside length of the v-belt, and the pitch line, which is the distance between the top and bottom sides of the trapezium. The width and height of a v-belt are defined by its cross-section. Each cross-section is given a different designation, including the width and height.
A standard V-belt is a v-belt with a fabric cover. It provides firmness in a smaller space and is less prone to belt whip when used in heavy-duty applications. Its slim profile and light gauge tensile cord make it suitable for many industrial applications. The standard length of a double cogged v-belt varies from 530 to 3,000 mm.
Single cogged v-belts are commonly used in manufacturing machines that operate in close proximity to 1 another. Single cogged v-belts increase lateral rigidity and reduce belt whip. They are also ideal for heavy-duty applications, such as in mining or quarrying. Double cogged v-belts also increase lateral rigidity to minimize belt whip.
The elastomer core of a v-belt is surrounded by tension cords. These tension cords are embedded into the rubber compound, creating a composite structure that provides a high degree of shock resistance and flexural strength. The tension cords are often made of steel, polyester, or aramid fibers. This material makes it much stronger and more durable.
A double cogged v-belt is a highly rigid option for applications where lateral rigidity is an important concern. The double cogged design also increases lateral rigidity to reduce belt whip and enhances power transmission efficiency. Double cogged v-belts also offer positive slip-proof engagement. These belts are also easier to maintain, require less maintenance, and require no lubrication.

China supplier Good Quality Timing Belt Tensioner Pulley Vkm31013 Apv2259 38903315p for Volkswagen Bora with Hot sellingChina supplier Good Quality Timing Belt Tensioner Pulley Vkm31013 Apv2259 38903315p for Volkswagen Bora with Hot selling

China Standard for Volkswagen Transporter and for CZPT S80 Timing Belt Tensioner Pulley OE Number 074109243e 074109243m Vkm11257 with Best Sales

Product Description

Quick view:

Description VOLKSWAGEN TRANSPORTER And For CZPT S80 Timing Belt Tensioner Pulley OE Number 074109243E 074109243M VKM11257
Material Chrome steel Gcr15, 65Mn, or 55, Aluminum
Application car makes For CZPT and VW
Size Outer: 73 mm
Width: 27 mm
Position Timing tension
Weight 0.4 kg
Brand SI, PPB, or customized
Packing Neutral, SI, PPB brand packing or customized
OEM/ODM service Yes
Manufacture place ZHangZhoug, China
MOQ 100 PCS
OEM replacement Yes
Inspection 100%
Warranty 1 year or 40,000-50,000 KMS
Certificate ISO9001:2015 TS16949
Payment T/T, PayPal, Alibaba

Fit for:
For CZPT 850Estate(855)(08.1995-12.1996,140)
For CZPT 850Saloon(854)(08.1995-12.1996,140)
For CZPT S70(LS,874)(01.1997-11.2000,140)
For CZPT S80I(TS,184)(01.1999-07.2006,140)
For CZPT V70I(LV,875,876)(12.1995-12.2000,140)
For CZPT V70II(SW,285)(11.1999-08.2007,140)
For VOLKSWAGEN CRAFTER 30-35 Bus (2E_) 2.5 2006-2013
For VOLKSWAGEN LT 28-46 II 1996-2006
For VOLKSWAGEN TRANSPORTER IV 1996-2003

OE Numbers:
8677053
9186258
9464101
074109243E
074109243K
074109243M
E
74109243K
M

Reference:
For DAYCO : ATB2333
For CZPT : T43067
For I-NA :
For S-KF : VKM 11257
For CZPT : GT36504

Packing and Delivery:

Work shop:

Exhibitions:

FAQ:
Q1.What is your shipping logistic?
Re: DHL, TNT, FedEx express, by air/sea/train.

Q2:What’s the MOQ?
Re: For the belt tensioner, The MOQ is always 100 sets. If ordering together with other models, small quantities can be organized. But need more time due to the production schedule.

Q3. What are your goods of packing?
Re: Generally, our goods will be packed in Neutral white or brown boxes for the idler pulley. Our brand packing SI & CZPT are offered. If you have any other packing requests, we shall also handle them.

Q4. What is your sample policy?
Re: We can supply the sample if we have ready parts in stock.

Q5. Do you have any certificates?
Re: Yes, we have the certificate of ISO9001:2015.

Q6:Any warranty of your products.
Re: Sure, We are offering a guarantee for 12 months or 40,000-50,000 km for the aftermarket.
 

Q7: How can I make an inquiry?

Re: You can contact us by email, telephone, WhatsApp, , etc.

 

Q8: How long can reply inquiry?

Re: Within 24 hours.

 

Q9: What’s the delivery time?

Re: Ready stock 10-15 days, production for 30 to 45 days.

 

Q10: How do you maintain our good business relationship?

Re: 1. Keep stable, reliable quality, competitive price to ensure our customer’s benefit;

2. Optimal lead time.

3. Keep customers updated about the new goods.

4. Make customers satisfaction as our main goal.

 

Q11: Can we visit the company & factory?

Re: Yes, welcome for your visit & business discussion.

 

How to Prevent Timing Belt Problems

Unlike their predecessors, timing chains and timing belts are made of rubber and synchronize the opening and closing of valves in the engine. While their benefits are numerous, they are prone to wear and tear over time. Here are some tips for ensuring your timing belt lasts for many years. Listed below are some of the most common problems that you may encounter when changing your timing belt. Read on to find out how to prevent them and keep your car running at peak performance.
belt

Timing belts are rubber

There are many advantages to using timing belts in your car. They are lightweight and reduce the strain on your vehicle’s internal components. They are also quiet when running, so you won’t have to listen to your car to know that maintenance is needed. If you’re concerned about noise, a quiet engine can help you determine whether your timing belts are broken or if you need to replace them altogether. A quiet engine can also help you notice signs of wear and tear before you do.
Regardless of material, rubber timing belts can be susceptible to stretching and breaking. They also are susceptible to high temperatures and the lubrication of motor oil, reducing their lifespan. Manufacturers have responded to this problem by creating timing belts made of engine-temperature-resistant rubber materials. The improved rubber compounds also provide greater strength and resistance to distortion. Reinforcing fibers also protect the teeth from shearing, reducing the risk of a worn-out timing belt.
While the open-ended, or spliced, types of timing belts have many advantages, they are generally unsuitable for high-speed applications. In most cases, rubber timing belts are used in high-speed machine tools and automatic doors. They are also quiet and require minimal maintenance. These characteristics make rubber timing belts a great choice for high-speed applications. You can even order custom-made timing belts for unusual applications.
Timing belts are important for the functioning of an engine. They link the camshaft and crankshaft to the crankshaft. They control the movement of valves and pistons. If a timing belt fails, it can cause major damage to the engine. If you are unsure of the benefits of rubber timing belts, consider a video on the topic. This will provide you with more information on timing belts.

They synchronize the opening and closing of the engine’s valves

During the combustion process of the engine, the valves in the cylinder head open and close. Fresh air enters the cylinder, which burns with the fuel to generate power. Exhaust escapes the engine through the exhaust valve. Each cylinder contains between 2 and 4 valves. The timing belt drives a camshaft, which rotates in a precise manner to synchronize the valve opening and closing.
A timing belt is a toothed rubber belt that connects the engine’s crankshaft to the crankshaft. Like most rubber parts, timing belts degrade over time, so it’s important to replace them at the proper intervals. Replacement intervals vary depending on the make and model of the vehicle, but they should be replaced every 60 to 90 thousand miles.
A broken timing belt will not start the engine. A timing belt driven vehicle will need to be towed to a repair shop for repairs. In the automotive industry, timing belts drive both “free running” and “interference” engines. The timing belt transfers the crankshaft’s rotation to the camshafts, which in turn actuate the valves in the intake and exhaust system. When they malfunction, the pistons can contact open valves, bending or punching them.
Timing belts also work with pistons and connecting rods to create power. Perfect timing is essential for the engine to run smoothly. The timing belt regulates both the pistons and the valves. If they are out of sync, they may not ignite properly, leading to catastrophic engine failure. When you’re looking for a replacement, look for these signs of wear.
belt

They are lighter, quieter and more efficient than timing chains

While the initial choice was for quieter performance, variable timing has led to greater efficiency and power. While noise is a factor, the average consumer cannot tell the difference. And while timing belts are generally lighter and quieter, a chain can be more noisy than a belt, which can cause more engine damage. If you’re unsure whether you should opt for a chain or a belt, consult your owner’s manual.
A timing chain functions similar to a timing belt but is made from metal and is housed inside the engine compartment. It receives its lubrication from engine oil. Timing chains can last a long time as long as you keep them properly maintained. A timing chain is not as efficient as a timing belt, but it is more accurate, quieter and easier to maintain.
A timing belt uses teeth to time the movement of various components in an engine. When the timing belt is broken, the valves in the engine will not be in sync, leading to a loss of pressure in the combustion chamber. This can cause a plethora of engine problems and cost-increasing repairs. A timing belt is also quieter and requires less lubrication, so it is safer and quieter than a timing chain.
After the advent of variable valve timing, cars began to use a timing chain. This design improved engine performance and reduced maintenance, but it also caused a backlash as consumers were no longer interested in this kind of routine maintenance. Today, however, timing chains are making a comeback in the automotive industry. While modern chains can still be noisy, they are easier to maintain, are lighter, and last longer than their chain counterparts.

They wear out over time

Even the best drive belts will eventually wear out. The main causes of belt wear include mileage and heat. The belt bends as it passes the pulley, producing heat that hardens the rubber. When the belt slips, it increases friction, accelerating the process. A worn-out belt can be very difficult to start, causing an engine to lose fuel efficiency. To help prevent this problem, check the belt for wear and tear.
A timing belt is an engine component that connects the camshaft to the crankshaft and controls the timing of combustion. These belts are made of industrial-strength rubber, and often contain nylon-reinforced cords. Although they are meant to last, they will eventually wear out. If the timing belt fails, your engine won’t run smoothly or you could spend thousands of dollars fixing it.
A faulty timing belt can cause the valves to open too early or too late, causing poor combustion and a drop in engine performance. If the timing belt breaks, the valves may hit the pistons and cause damage. This can lead to engine breakage, which requires a new engine. To prevent this, you should replace the timing belt every couple of thousand miles. If you can’t find a reliable mechanic, it is best to seek professional help from a reputable mechanic.
Another warning sign that your timing belt needs replacing is a ticking sound coming from within your engine. This is an indication of a lower oil pressure than normal. Low oil pressure can affect the timing belt as it can cause the tensioner that holds the belt taut will lose pressure. Eventually, the belt may even break, allowing the camshafts to slip and break. Once this happens, it is time to replace the timing belt.
belt

They can be repaired

Timing belts can be repaired. If your timing belt breaks, you can take your car to a repair shop to have it repaired or replaced. The price of a repair depends on the labor hours and how many hours it takes to do the job. A bad timing belt can ruin your engine and cause it to break down completely. If you’re unable to drive your vehicle, it may require towing and a new engine.
For most drivers, a timing belt replacement will cost about $1,000 at a dealership. Luckily, you can often get the same service for less at an independent auto repair shop. Often, a timing belt repair requires replacing the water pump, too. It makes sense to replace both at the same time. But remember that timing belts are more complicated than that. If you’re worried about the cost, you can replace the water pump along with the timing belt.
If you’re in the mood to do this repair, there are many companies that offer this service. The cost is relatively low and you’ll probably save hundreds of dollars over the course of the job. However, timing belt repair is not a simple job and must be done correctly or you could end up damaging your car engine. Therefore, it’s important to know how to repair a timing belt yourself to avoid the high price of hiring a mechanic.
When timing belts start to fail, there are a few warning signs you can listen for. A difficult start-up can be a sign that your belt needs to be replaced. Also, thick smoke coming from the tailpipe can be a sign that the timing belt needs to be changed. In addition to these symptoms, your timing belt may have a crack or broken gear teeth, which means it needs to be replaced.

China Standard for Volkswagen Transporter and for CZPT S80 Timing Belt Tensioner Pulley OE Number 074109243e 074109243m Vkm11257 with Best SalesChina Standard for Volkswagen Transporter and for CZPT S80 Timing Belt Tensioner Pulley OE Number 074109243e 074109243m Vkm11257 with Best Sales

China factory CZPT Tensioner Pulley Timing Belt Tensioner OEM 13503-50011 for Land Cruiser Lexus with Great quality

Product Description

Why Choose Us

1.Reply your enquiry in 24 working hours,any time you can contact me.
2.OEM, buyer design, buyer label services provided.
3.Exclusive and unique solution can be provide to our customer by our welltrained 
   and professional engineers and staffs.
4.we have the certification of ISO 9001
5.Special discount and protection of sales area provided to our distributor.
6.timely delivery
7.Good after-sale service
8.Small MOQ is acceptable
 

How to Repair a Timing Belt Tensioner

Your timing belt tensioner is a critical component of your vehicle’s drivetrain. Too little tension, for example, will cause the belt to slip, and too much tension can overload shaft bearings, leading to premature failure. If you notice that your belt tensioner is not working properly, you should immediately visit a mechanic. Corrosion from road splash, dirt, mud, or other debris can jam the tensioner housing. To avoid this, make sure that you replace your timing belt tensioner as soon as possible.
belt

Symptoms of a bad belt tensioner

If you’ve ever wondered what signs indicate a bad belt tensioner, look no further than your vehicle’s engine. Worn belts or a broken tensioner can cause an irritating squealing noise, as well as the belt to slip. Even worse, a bad tensioner can cause water to enter the belt and pulley, resulting in water damage. A worn tensioner is usually the culprit of the noise, but there are also other warning signs that a belt is in trouble.
Your vehicle’s engine may start to run poorly or even squeal when you turn the key. Similarly, your engine may fail to start at all, or the check engine light may illuminate. The belt may also start to wear out in an unusual pattern. These signs indicate that the tensioner is in need of replacement. If you notice 1 or more of these signs, get your car checked right away.
To check the condition of the tensioner, remove the drive belt and observe the pulley. You may notice rust dripping or bleeding at the mounting bolts, which are the most common signs of a bad tensioner. If you can’t remove the drive belt, check the pulley by rotating it. If you feel resistance, the pulley is likely worn or slack.
Failure of the belt tensioner will also cause other parts of the car to fail. If a bad belt tensioner isn’t fixed quickly, you might not be able to use the vehicle properly. You could end up breaking your car’s engine, losing power steering, and possibly even the water pump. If your car is not running right, you could be stuck in the middle of nowhere. Even if the alternator doesn’t work, you’ll still have a malfunctioning power steering system and a dead AC system.
A broken timing belt tensioner can cause strange noises or a no-start condition. These noises and symptoms are signs of a bad belt tensioner, and you’ll have to replace it ASAP. If you don’t know what symptoms mean, don’t hesitate to take your car to a mechanic. You’ll be surprised how easy it is to check this vital component and save yourself a bunch of money.

Components of a belt tensioner

The components of a belt tensioner assembly consist of 4 key components. The clearance between the pulley and the base is critical to the tensioner’s operation. If the tensioner is installed incorrectly, the spring can break and cause severe injury. The spring’s preload and powerful force make it difficult to service the unit safely. These parts are non-serviceable. If you are unsure of how to repair your tensioner, contact an authorized mechanic.
The components of a belt tensioner drive are shown in FIG. 2. The rotor shaft is connected to the drive screw, while the second transmission is connected to the gear shaft. The rotor and gear shaft are in parallel with each other. The gear shaft and worm wheel are connected to the belt tensioner drive. In other words, the belt tensioner drive is located in the B-pillar of the motor vehicle.
A belt tensioner may be equipped with a drive shaft and electric motor. The drive shaft may also contain a worm gear or worm wheel. The drive shaft also has an intermediate gearbox. Once the tensioner is set, it is ready to move to its safe-position position. It is a relatively simple and inexpensive replacement for your belt. When replacing a multi-ribbed belt, be sure to replace the tensioner along with the belt. Gates recommends replacing all wear parts at once.
In the event of a faulty drive belt tensioner, the belt will not stay taut. The pulley can wobble and cause the belt to fray. In addition to this, the bearings can cause a loud squealing noise. In this case, the accessory motors will continue to run, while the belt itself will not. Therefore, replacing the timing belt tensioner is an important part of maintaining the car.
In some systems, the belt tensioner uses a worm gear as the first gear. This results in rolling engagement of the screw’s teeth. This reduces noise and vibrations, while maximizing the efficiency of the belt tensioner drive. Additionally, a worm gear can eliminate the need for additional parts in belt tensioners. While this may not be practical in all instances, it is a good choice for space-constrained environments.
belt

Repair options for a timing belt tensioner

A timing belt tensioner is an essential part of an automobile’s timing chain and is responsible for ensuring proper timing. Proper alignment of timing marks is essential to the proper operation of the engine, and improper alignment may lead to damage to the engine. To repair a timing belt tensioner, there are several repair options available. First, you need to remove the engine cover. You can then remove the timing belt tensioner by loosening the pulley using a ratchet or breaker bar.
When the timing belt isn’t properly tensioned, the engine will misfire. The engine misfires when the valve opens and the pistons rise at the wrong time. When this happens, the timing belt cannot properly grip the gears and the engine will not function. If this part fails, you’ll have to replace the whole timing chain. However, if you are handy with tools, you can easily replace the entire timing belt tensioner yourself.
If your timing belt tensioner is out of alignment, you should replace it. If you’re not sure whether it needs to be replaced, check it with a professional and learn the details of the repair. The timing belt tensioner is the most critical part of the engine, so it’s important to know about it. Otherwise, your car won’t run as well as it could. Repair options for a timing belt tensioner will vary depending on the severity of the problem and how much damage it has done.
While there are several repair options for a timing belt tensioner, the average cost of replacement is $364 to $457, and this doesn’t take into account any tax or fee you may be charged. DIY repair methods will usually cost you $50 to $150, and you’ll likely save a lot of money in the process. However, you need to remember that you may be unable to do the job yourself because you don’t know how to use the proper tools and equipment.
While it is not difficult to replace a timing belt tensioner on your own, you should know that you’ll need to remove other parts of the engine as well as special tools to make the repair properly. This is an advanced repair job and requires a great deal of skill. If you’re new to home car repair, you may not want to attempt it yourself. There are many other options, such as hiring a mechanic.
belt

Installation instructions

While there are no universal installation instructions for belt tensioners, the manufacturer of your car may provide detailed instructions. Before attempting to replace your tensioner, read the manufacturer’s recommended procedures carefully. To install a new tensioner properly, unload the old 1 and take a picture or sketch of how the belt should be routed. Once the old tensioner is out, follow the manufacturer’s torque specifications. Make sure to unload and remove the belt from the tensioner, and follow the manufacturer’s torque specifications to install the new one.
If your car comes with a manual belt tensioner, you can follow the instructions. The manual will have a corresponding guide for installation. When installing a belt tensioner, make sure the manual clearly states the static tension for your particular model. Check that it is in line with the engine relief to ensure proper belt tension. You can then use a 6mm allen key to turn the tensioner clockwise and counterclockwise. Once it is in position, release the tensioner to operate. The belt tensioner should now apply the proper tension to your belt.
Before installing a new belt tensioner, make sure you read the manual completely. You should follow these steps carefully to avoid any problems with the tensioner. If the tensioner has failed, you must replace it immediately. A new belt tensioner will help you ensure proper performance of your accessory belt drive system. If you are installing a new multi-ribbed belt, you should replace the tensioner as well. However, it is important to note that replacing the belt tensioner is a complicated process and requires a mechanic to be able to safely remove the belt from the engine.
To install a second stage drive belt, walk the belt onto the input drive and generator. Ensure that the belt is seated properly in the grooves of the pulleys. Next, replace the input drive belt and right and left Drive Disk covers. Test the machine to ensure that it is working properly. If it doesn’t, replace the original drive belt. After installing the new belt, you may want to read the manual again to make sure it is in perfect condition.

China factory CZPT Tensioner Pulley Timing Belt Tensioner OEM 13503-50011 for Land Cruiser Lexus with Great qualityChina factory CZPT Tensioner Pulley Timing Belt Tensioner OEM 13503-50011 for Land Cruiser Lexus with Great quality